Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Oil filter

First, open the filler cap located at the top of the engine to facilitate oil drainage and then, after placing a container to collect the used oil, unscrew the drain plug under the oil sump; once emptied, refit the plug after applying a new washer. At this point, access the engine bay and locate the oil filter cartridge at the front of the engine: use a metal strap wrench to unscrew it; apply clean oil to the seal of the new filter and screw it into place (hand-tight is sufficient); finally, fill the engine with new oil until the correct level is reached.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing Engine Oil and Filter
Changing Engine Oil and Filter
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) Open the front bonnet and locate the oil filter: it is situated at the front, near the alternator. Position an oil collection tray under the oil sump…
Renault Clio oil and engine oil filter replacement
Renault Clio oil and engine oil filter replacement
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) In this video tutorial we will see how to remove the oil filter of a Renault Clio third series and in the meantime we will also take care of the oil …
Replacement of the engine oil and oil filter for the Renault Clio 1.2.
Replacement of the engine oil and oil filter for the Renault Clio 1.2.
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Let's find out how to quickly and easily perform the routine maintenance service, replacing the engine oil and oil filter, of the Renault Clio. First…

Other guides you may be interested in

How to Remove the Rear Bumper of an Opel Corsa

How to remove the rear bumper of an Opel Corsa? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdriver or battery-powered drill to unscrew the securing screws located near the rear lights, then remove them from the body along with their connectors. Unscrew the screws located at the top of the bumper, then unscrew the screws on the sides of the wheel arch liners and at the bottom of the bumper. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the body (disconnect any power cables if necessary).

Watch the video!


by ScegliAuto

More videos