|
Do it yourself
| |||
| ||||
How to change the engine oil and filter of the Renault Clio.
Model: Renault Clio
Clio IV, MK 4, Clio 4
- Years 2012-2019
The oil and filter change on the Renault Clio is carried out by securing the car on a flat surface, with the wheels blocked and using appropriate supports if working elevated. Before draining, bring the engine to a moderate temperature and then turn it off, so the oil drains better. Open the filler cap and, if accessible, remove the dipstick to facilitate drainage. Position a large container under the oil pan and unscrew the drain plug, allowing the oil to completely flow out; clean the area, check the seal of the plug, and replace the washer if required, then close it, tightening to the torque specified by the manufacturer.
Next, move on to the oil filter. Depending on the engine, it may be accessible from the top or the bottom: unscrew it with the appropriate tool, let it drain, and clean the seating area. On the new filter, lubricate the gasket with a thin layer of oil and screw it on until it makes contact, completing the tightening by hand according to the filter's instructions. Then fill with new oil of the grade and specifications indicated in the manual, start the engine for a few seconds, and check for any leaks from the plug and filter. Turn it off, wait a few minutes, and adjust the level with the dipstick until it reaches the correct value.
Posted on 24 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
Today you will learn the procedure for performing routine maintenance by replacing the engine oil and oil filter on the Renault Clio 1.5 dCi. First, …
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
Today's instructions will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter in the Renault Clio 1.2 T…
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
The following video tutorial shows us how to independently perform an oil and oil filter change on a Renault Clio model 4. To perform the oil change,…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.474
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |