Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Engine Oil and Oil Filter on the Renault Clio 1.2

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Let's discover how to quickly and easily perform the routine maintenance service by changing the engine oil and oil filter on the Renault Clio. First, lift the vehicle and remove the plastic protective cover located under the engine; then unscrew the drain bolt found on the sump, allowing the oil to drain into a container for about ten minutes.

At this point, unscrew the oil filter cartridge and replace it with a new one; screw it in by hand first, then tighten gently.

Finally, pour in the new engine oil, filling up to the maximum level mark!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to reset the oil light on the Renault Clio 3
How to reset the oil light on the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The oil level indicator of your Renault Clio Mk3 indicates the need to change the oil and the filter. If the indicator continues to light up even aft…
Replacing the Oil Filter and Engine Oil in a Renault Clio
Replacing the Oil Filter and Engine Oil in a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video tutorial, you will learn how to remove the oil filter from a third-generation Renault Clio, and in the meantime, you will also change t…
Top Up Engine Oil on Renault Clio 4
Top Up Engine Oil on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) For the Renault Clio 4 with a 1500 cc diesel engine, it is recommended to use SAE 5W40 oil. With the engine off and the handbrake engaged, lift the b…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos