Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Checking Engine Oil Level

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Engine oil

Checking the engine oil level is advisable, especially before a long journey or if a significant amount of time has passed since the last maintenance; the check can be performed with either a cold or warm engine: in the latter case, leave the engine off for at least 15 minutes so that the level stabilises and the circulating oil drains back into the sump. Position the vehicle on level ground, open the bonnet and extract the oil level dipstick, clean it with a cloth or paper and insert it back into its tube until it is fully seated; remove it and check where the wet part reaches: the dipstick also has two reference marks, the minimum lower down and the maximum higher up (between minimum and maximum, consider 1 kg of oil). It is important that the level never drops below the minimum and at the same time does not exceed the maximum level; before topping up, consider the possibility of performing a complete oil change, especially if you are close to the next maintenance.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (1993-2007 / Twingo 1) The correct tyre pressure affects various factors of vehicle use, such as longevity, fuel efficiency, and safety. To determine the correct inflation …
Renault Twingo (2007-2014 / Twingo 2) Today's guide will show you how to remove and replace the external wing mirror on a Renault Twingo. First, open the front door and begin by removing …
Renault Twingo (1993-2007 / Twingo 1) In this short and simple guide, we will see the positioning and layout of the fuses in the Renault Twingo. First of all, we climb aboard the car and …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos