Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter in a Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and filter in a Renault Twingo 2, warm up the engine for a few minutes to make the lubricant less viscous. Then turn off the car, secure it, and position a container under the engine.

Unscrew the drain bolt of the sump to completely empty the used oil. After draining, locate the oil filter and remove it with the appropriate tool. Before installing the new replacement, apply a thin layer of oil to the gasket to improve the seal.

Refit the filter, close the drain plug, and add new oil from the top of the engine using the correct quantity. Finally, start the engine for a few seconds, check the oil level with the dipstick, topping up if necessary.


Posted on 22 May 2026 by ScegliAuto


Related tutorials

Changing Engine Oil on Renault Twingo 1.2
Changing Engine Oil on Renault Twingo 1.2
Renault Twingo (2007-2014 / Twingo 2) In this video tutorial, you will learn how to change the engine oil in a Renault Twingo 2 1.2: we will also replace the oil filter. First, open the b…
How to Change the Cabin Air Filter in a Renault Twingo
How to Change the Cabin Air Filter in a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To change the cabin air filter in a third-generation Renault Twingo, fully slide the passenger seat back and lower the backrest to work with more spa…
How to Replace the Cabin Air Filter of a Renault Twingo
How to Replace the Cabin Air Filter of a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Replacing the cabin air filter in the Renault Twingo is a very simple task. First, open the engine compartment and remove the lower part of the winds…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos