Do it yourself
| ||||
|
Renault Megane - Video tutorial
Model: Renault Megane
Megane 2
- Years 2002-2010 To be able to replace the timing belt of the Renault Megane 1.5 DCi, the hood must be opened to access the left side of the engine compartment, where the plastic cover that covers the pulleys is located. By removing this cover, it will be possible to access the pulleys and the belt itself: by loosening the central pin of the tensioner roller, the tension of the belt itself will be reduced and it can also be extracted from its housing, replacing it with a new one. After the new belt has been installed, it will need to be tensioned again by screwing the belt tensioner roller so that it can be covered with the special plastic cover.
Posted on 31 July 2022 by ScegliAuto
How to replace the timing belt on the Renault Megane 1.5 dci?
Renault Megane (2015-2023 / Megane 4, Megane IV) The timing belt of your Renault Megane with 1.5 DCI engine is done every 6 years or 160000km. It varies a lot according to the use of the vehicle and
Replacing the timing belt of the Renault Megane 2 1.5 DCI
Renault Megane (2002-2010 / Megane 2) Today we will see, in this guide, the main steps that will allow us to change the timing belt of the Renault Megane second series, with a 1.5 DCI eng
When and how to change the timing belt on Renault Megane 2 1.5 DCI
Renault Megane (2002-2010 / Megane 2) In this video we will see when and how to change the timing belt on a Renault Megane 2 1.5 DCI, but also on the Clio, Dacia Sandero, and Nissan Qashq Other guides that may interest you
|
Frequently Asked QuestionsHow do you replace the horn on the Citroà «n Berlingo?In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |