Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tyre warning light on the Renault Twingo?

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part:

On the Renault Twingo, once the correct tyre pressure is restored after, for example, a puncture, you need to manually reset the warning light. Start by turning on the instrument cluster, then use the top button located at the end of the right lever to scroll through the display screens until you reach the one for the tyres. At this point, press and hold the same button for about 20 seconds, or for as long as it takes to remove the warning. Finally, turn off and then turn on the instrument cluster again.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2014-2024 / Twingo 3, Twingo III) On the Renault Twingo, to reset the tyre pressure warning light, first inflate the tyres to the correct pressure value, which is indicated on the sti…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) It is important to note that the video posted, which also includes a verbal description of the entire procedure specified, refers to the 2016 Renault…
Renault Twingo (2026-2026 / Twingo 4, E-Tech, Twingo III) You can clear the tyre pressure warning light on the Renault Twingo by inflating the tyres to the correct pressure value: this value will be written …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos