Do it yourself
Frequently asked questions about cars and motorcycles

Where to find the fuse diagram on Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Fuse box

We can see thanks to this video guide the location of the fuse box on a first generation Renault Modus up to the year 2007. For left-hand drive models, the box is positioned behind a hatch on the dashboard, to the left of the steering wheel. For right-hand drive models, however, the fuse box is always located on the left side of the vehicle but inside the glovebox, so we open the glovebox and remove the fuse box cover to access it. This video tutorial also shows the whole diagram of the relative fuses of the car.

Posted on 8 October 2022 by ScegliAuto

Video tutorial

Related tutorials

Renault Modus (2004-2013 / MK 1) Here are the instructions on how to access the fuse boxes of the Renault Modus, along with the diagram and layout. First, open the driver's side fron…
Renault Modus (2004-2013 / MK 1) Let's take a look at the fuse box placement and diagram for the Renault Modus in this guide. First, let's get in the car and locate the internal fuse…
Renault Modus (2004-2013 / MK 1) Through this very short video tutorial you will be able to see the position, name and operating amperage of each individual fuse and relay present in…

Other guides you may be interested in

    Frequently Asked Questions

    • Modus 2004-2013 - Where are the low beam headlight fuses located in the Renault Modus? Read answer
    • Modus 2004-2013 - Where is the fuse box located in the Renault Modus? Read answer

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos