Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Change Service on Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Warning light – error code

Close the bonnet and doors, turn the key and switch on the ignition; you will notice the orange key symbol illuminated on the dashboard. Locate the multifunction lever to the right of the steering wheel; at the end of the lever, there are two controls, one with an upward arrow and one with a downward arrow. Press the control with the downward arrow several times until you reach the menu: "oil change service". At this point, press both controls with the arrows simultaneously and hold them until the display starts to flash. Then release both controls, and the service indicator will turn off. Finally, turn the key off and then back on to check that the warning light is extinguished.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Kangoo (2007-2021 / MK 2, FC, FW) Resetting the oil service on a Renault Kangoo is very simple; let's see how to proceed in this tutorial. This procedure should only be followed after…
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this brief and simple guide, discover how to reset the service light for the routine oil change on the 2008 Renault Kangoo, second series. First, …
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today, learn how to reset the oil change warning light on a Renault Kangoo. To reset the light, turn on the ignition while holding down the upper arr…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - What does the Serv warning light mean on a Renault Kangoo? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos