Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Renault Megane 3

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Service Light

To reset the service warning light on the Megane 3, we must: Check that the brake pedal is completely released; switch on the instrument panel, without however starting the car engine; press and hold the accelerator pedal; press and release the brake pedal 3 times; release the pedals at the same time; wait 10 seconds; in the meantime, press the button on the outside of the lever on the right side of the steering wheel for about 10 seconds. This way the light will go out. Now you can turn off the ignition. Turn the ignition back on to check and check that the warning light is actually off.


Posted on 29 July 2024 by ScegliAuto



How to reset the service light on the 2017 Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) The reset of the service light on the 2017 Renault Megane must be performed after servicing operations. To reset the service light, we will need to:
How to reset the oil light on the Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) The orange service light on the instrument panel of your Renault Megane Mk4 lights up steadily whenever it is necessary to service the car. If it con
How to reset the service light on the Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) The service light, related to the car service, on a Renault Megane mk4 model vehicle activates when it is necessary to perform operations that includ

Other guides that may interest you

    Frequently Asked Questions

    • Megane 2008-2015 - How do you reset the Renault Megane Service warning light? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos