Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Switch from the Renault Kangoo

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Key

In this video tutorial, you can see how to remove the ignition switch from the Renault Kangoo. First, remove the plastic panels located under the steering wheel; also remove the lower panel, which has a total of 5 screws to take out. Once the panels under the steering wheel are removed, to allow the ignition switch to come out with the cable attached, you must first free the cable; therefore, you also need to remove the bumper support located under the steering wheel. Then, unscrew the 4 screws and the panel will come away. Next, unscrew the Torx screw and with a bit of leverage, you can pull out the cable. Now you can remove the ignition switch.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to program the remote key of the Renault Kangoo
How to program the remote key of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) To program the remote key of a Renault Kangoo vehicle, we need to get inside the vehicle and insert the key into the ignition switch. Then, we press …
How do you remove the steering wheel in the Renault Kangoo 1?
How do you remove the steering wheel in the Renault Kangoo 1?
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this short video guide, we will see how to disassemble the steering wheel of the Renault Kangoo 1, in a simple and fast way. On the back of the st…
How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos