Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Battery

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

Video tutorial

The battery is located on the right side of the engine bay (when viewed from the front), but to access it, you need to remove the plastic cover directly under the windscreen; then remove the seal along the edge, unscrew the fixing screws, and take off the plastic cover; next, remove the battery compartment cover, disconnect the terminals, and unscrew the fixing bracket located at the bottom of the battery using a ratchet with a socket or an extension; then extract the old battery, compare the dimensions with the new one, check the terminal positions and specifications (Amp rating and cold cranking amps), and reverse the process for installation.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Battery Replacement Instructions
Battery Replacement Instructions
Renault Modus (2004-2013 / MK 1) Before proceeding with the battery removal, ensure you have any protection codes, such as for the radio. The battery is located at the front right of…
Guide to Replacing the Front Headlamp Bulbs on a Renault Modus
Renault Modus (2004-2013 / MK 1) In this brief and simple guide, learn how to remove and replace the front headlamp bulbs on a Renault Modus in just a few quick steps. First, open th…
Replacing the Cabin Air Filter of the Renault Modus
Replacing the Cabin Air Filter of the Renault Modus
Renault Modus (2004-2013 / MK 1) This guide provides the necessary instructions to remove and replace the cabin air filter of the Renault Modus. First, get into the vehicle on the pa…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos