Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Cabin Air Filter on a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

Learn how to change the cabin air filter on a Renault Kangoo. Access to the cabin filter is not from the cabin, but from the grille under the windscreen on the passenger side of the vehicle.

You need to open the bonnet to remove the grille on the right side to access the filter. The replacement part costs £9.99 on Amazon (+ £3.99 delivery).

To access the filter, remove a plastic cover on the right side of the bodywork and take off the right wiper to lift the entire plastic panel under the windscreen on that side. Underneath, there is another plastic cover held in place by two Torx screws which you will unscrew.

Further down, you will find the cabin filter cap secured by a metal Torx screw that you will also unscrew to access the filter. Clean the container with a blast of compressed air, replace the filter, and reassemble everything in reverse order.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Renault Kangoo (1997-2008 / KC, MK 1, KW) To replace the cabin filter on a Renault Kangoo, open the bonnet to access the panel at the base of the windscreen. Before removing this panel, disco…
Renault Kangoo (2020-2026 / MK 3, KFK, FFK) The cabin filter of the Renault Kangoo III is located behind the glove compartment (passenger side dashboard). No tools are required. Empty the drawe…
Renault Kangoo (1997-2008 / KC, MK 1, KW) To replace the cabin filter on the Renault Kangoo, open the bonnet to access the panel at the base of the windscreen. This panel must be released fro…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos