As a replacement for the headlight bulbs on Renault Clio 2

With the engine off and with the handbrake on, open the engine compartment hood, the glass of the bulbs must NEVER be touched with bare hands; to replace the turn signal light bulb, turn its tab anticlockwise and remove it from the ceiling light, to remove the light bulb from the socket, push it and rotate it to release it from the housing. Insert the new bulb into the socket and reinsert the socket into the headlight. To replace the H7 bulb of the dipped beam, remove the rubber cover outermost from the ceiling light, grasp the black connector and pull it out of the bulb housing; check the position of the bulb tab and then remove it by moving it to the sides and pulling it in the meantime, fit the new bulb by placing the tab in the direction that the previous bulb was turned, refit the bulb connector in the ceiling light and refit the rubber cover. The cover of the high beam and position light is the innermost one of the headlight, remove the cover from the ceiling light, remove the connector, pressing the sides of the clip, move it to the sides to free the bulb, mount the new bulb respecting its position on the lamp holder, hook the fastening clip by pressing it and pushing it inside to hook it, connect its power supply. To replace the position light bulb, remove it by pulling it, pull the bulb to free it from the socket and replace it, insert the sidelight bulb holder into the roof light and refit the rubber protection cover.