Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the cabin filter on the Renault Scenic 4

Renault Scenic - Video tutorial

Model: Renault Scenic Scenic 4, MK IV, Scenic IV, MK 4 - Years 2016-2022
Part: Cabin air filter
Operation: How to replace the cabin filter on the Renault Scenic 4

The procedure necessary to be able to independently replace the cabin air filter of your Renault Scenic fourth series (year 2016-2022) is not the simplest, but if you follow the instructions described in our new guide you will have no problems . First, get yourself a small flat screwdriver and get to the passenger side. Using the screwdriver, remove the plastics located above and to the right of the glove compartment. Disconnect the electrical pin present and immediately after unscrew the various screws. Finally, disassemble the entire glove box and locate the filter box. Open it and replace the old filter with the new one.


Posted on 16 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2016-2022 - Where is the cabin air filter located in the Renault Scenic 4? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter located in the Renault Scenic? Read Answer
    • Scenic 2016-2022 - Where is the cabin air filter located in the Renault Scenic 4? Read Answer
    • Scenic 2016-2022 - What is the location of the cabin air filter on the Renault Scenic? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter on the Renault Scenic III? Read Answer
    • Scenic 2009-2015 - Where is the cabin filter on the Renault Scenic Xmode? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos