Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulbs in a Renault Scenic?

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

As shown in this tutorial, replacing the position light bulbs in a Renault Scenic is an extremely simple and quick task. Before proceeding, ensure the key is not in the ignition for safety.

Start by opening the bonnet, then position yourself in front of the headlamp in question and remove the large rubber cap located at the back. Next, locate the small bulb at the bottom, grasp it by the connector, and pull it outwards.

At this point, you can insert the replacement bulb and follow the reverse procedure to reassemble everything.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlight Bulbs on the Renault Scenic
Replacing the Rear Headlight Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this guide, follow the steps to remove and replace the rear headlight bulbs on the Renault Scenic. First, open the boot and start by removing the …
How to Replace the Position Lights in a Renault Scenic?
How to Replace the Position Lights in a Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) In this tutorial, you will see how to replace the bulbs of the position lights in a Renault Scenic, a very simple and quick operation. First, ensure …
How to Replace the Rear Lights and Bulbs of the Renault Scenic
How to Replace the Rear Lights and Bulbs of the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) This guide shows the procedure for removing and replacing the rear lights and their bulbs on the Renault Scenic. First, open the boot and start unscr…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos