Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the TPMS on a Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Warning light – error code

This brief video guide shows how to reset the tyre pressure warning light on a fourth-generation Renault Clio, produced from 2012 to 2019. Start by turning on the vehicle's instrument panel without starting the engine, then press the indicator buttons located at the end of the right-hand stalk to open the menu on the information display of the speedometer. Scroll through the menu options until you reach the tyre pressure section, then hold the up arrow button to execute the reset.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To reset the tyre pressure on the Renault Clio, start by turning on the instrument cluster and then start the car. Use the upper button on the end of…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Follow the instructions in this very short video to learn how to reset the tyre pressure light on the Renault Clio 4. Before doing so, ensure that th…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video tutorial, we can see how to reset the tyre pressure warning light on our Renault Clio 4. The procedure is very simple and quick to perf…

    Frequently Asked Questions

    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2019-2026 - What are the warning lights on the dashboard of the Clio 5? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer
    • Clio 2012-2019 - How can I retrieve the unlock code of the car radio of my Renault Clio? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos