Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Trim on the Doors of the Renault Arkana

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Checks and maintenance

To replace the external trim on the doors of the Renault Arkana, open the corresponding doors to access the bolts securing them from the inside. Once these bolts are loosened, you can detach the trim from the outside of the door, completely removing it and replacing it with new replacement parts. After the replacement, secure the pieces by reinserting the screws from inside the door; this will allow you to open and close them to verify that they have been installed correctly.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service and tire pressure on the Renault Arkana.
How to reset the service and tire pressure on the Renault Arkana.
Renault Arkana (2019-2026 / MK 1) In the Renault Arkana, to reset the maintenance warning after an oil change, park the Renault Arkana and turn on the instrument panel without startin…
Where are the engine fuses of the Renault Arkana located?
Where are the engine fuses of the Renault Arkana located?
Renault Arkana (2019-2026 / MK 1) If you are looking for the fuse box of the engine of your Renault Arkana (year 2022), just read the following guide carefully and follow all the step…
Where is the OBD2 Port in a Renault Arkana?
Where is the OBD2 Port in a Renault Arkana?
Renault Arkana (2019-2026 / MK 1) If you own a Renault Arkana and want to know how to access the OBD2 port of the car, then the following guide is all you need. First, enter the vehic…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos