Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear light of the Renault Koleos

Model: Renault Koleos MK 1 - Years 2008-2015
Part: Tail light

Follow these steps to remove the rear light of the Renault Koleos. Remove the plastic cover protecting the bolt you will unscrew, and also take out the plastic pin to its left. Partially remove the left cover of the boot to disconnect the electrical connector. Using plastic levers to avoid scratching the bodywork, pry on the frame until the entire unit is released; now remove the grommet, and you can finally take off this part of the light. Next, remove the part attached to the tailgate: unscrew the two bolts on the left, and using the plastic lever, remove the light unit and finally disconnect the electrical connectors.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear bumper of the Renault Koleos
How to disassemble the rear bumper of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Removing the rear bumper of your first-generation Renault Koleos may seem like a very complex operation and not feasible without the help of a profes…
How do you replace the rear headlight bulb of the Renault Koleos?
How do you replace the rear headlight bulb of the Renault Koleos?
Renault Koleos (2016-2024 / MK 2) In order to replace the rear headlight bulb of the Renault Koleos, you need to open the rear hatch, in order to locate the inner trim panel correspon…
How to replace the rear brake pads of the Renault Koleos
How to replace the rear brake pads of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Following the instructions in this guide, we will see how to disassemble and replace the rear brake pads of the Renault Koleos. First of all, lift th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos