Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlining in a Renault Megane?

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Checks and maintenance

In this tutorial, you will see how to remove the headlining in a Renault Megane, a very simple operation. Start by removing both sun visors, then detach each grab handle and proceed to remove the panels from both the windscreen pillars and the doors. Once this is done, extract the front interior light, the central one, and move to the rear of the car, where you will remove the accessible plastic rivets from the boot area. At this point, the headlining is free to be removed from the roof. Follow the reverse procedure to fit the replacement and reassemble everything.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Use the Manual Key in the Renault Megane?
How to Use the Manual Key in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In the Renault Megane, it can happen that the remote battery is flat, making it seemingly impossible to unlock the lock. In this tutorial, you will s…
How to Remove the Front Brake Disc from a Renault Megane
How to Remove the Front Brake Disc from a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Before you start, lift the front end of your Renault Megane. Begin by removing the front wheel by unscrewing the relevant fixing bolts. Next, unscrew…
How to open and replace the fuel cap of the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Today's main instructions will show us how to disassemble and replace the fuel door of the Renault Megane. First, we take our remote control and star…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer
    • Megane 2008-2015 - What does the Renault Megane "Risk of engine failure" label mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos