Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Discs and Pads

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Brake rotors

To replace the front discs and pads, lift the vehicle on a ramp and remove the front wheel; then disconnect the retaining spring of the pads, remove the protective caps, and unscrew the caliper mounting bolts to remove it from its position; extract the old pads and also remove the brake caliper bracket; at this point, unscrew the disc mounting screws from the hub, take off the old disc, clean the disc seat on the hub, and apply grease before installing the new one, ensuring to clean it of protective oil; then install the caliper bracket, insert the new pads, push back the caliper piston, and secure it to the bracket by applying the caps and the retaining spring.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Discs and Pads
Replacement of Front Discs and Pads
Renault Scenic (2003-2009 / MK 2, Scenic 2) Lift the vehicle on suitable axle stands and remove the front wheel; unscrew the retaining bolts of the brake caliper from the support and remove it;…
Replacing Brake Pads and Discs
Replacing Brake Pads and Discs
Renault Scenic (1996-2003 / ) Obtain original replacement discs, then remove the wheel and subsequently detach the caliper. Remove the caliper support bracket using a spanner by u…
Replacement of Rear Discs and Pads
Replacement of Rear Discs and Pads
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To replace the rear brake discs, lift the vehicle and remove the rear wheel; then remove the caliper mounting bolts and hang it with a cable or zip t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos