Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace the fuel pump in the Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio Clio 3, MK 3, Clio III - Years 2005-2013
Part: Fuel pump
Operation: How to replace the fuel pump in the Renault Clio?

Replacing the fuel pump in the Renault Clio is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, make sure that the key is not inserted so that you can work safely, then go to the back of the vehicle and remove the seat of the sofa. Next, remove the central aluminum cover, remove the circular cap, and disconnect both the power connector and both fuel lines. At this point, we can unscrew the large outer ring, remove the pump from the tank, and install the replacement, following the reverse procedure.


Posted on 16 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Clio 1998-2005 - What does the Renault Clio 2 diesel pump warning light mean? Read Answer
    • Clio 1998-2005 - Where is the fuel pump located on Renault Clio? Read Answer
    • Clio 2005-2013 - Where is the fuel pump of the Renault Clio located? Read Answer
    • Clio 2005-2013 - How much does it cost to replace the Renault Clio petrol pump? Read Answer
    • Clio 1998-2005 - How much does the petrol pump cost of a Renault Clio 1.2? Read Answer
    • Clio 1998-2005 - How to replace the fuel pump on the Renault Clio Mk2? Read Answer
    • Clio 1998-2005 - What problems does the diesel pump of the Renault Clio 1.5 dCi have? Read Answer
    • Clio 2005-2013 - Where is the inertia switch on the Renault Clio 3? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos