Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to remove the fuel pump of a Renault Clio

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fuel pump
Operation: How to remove the fuel pump of a Renault Clio

How to disassemble the fuel pump on a Renault Clio? We disconnect the battery cables, then, we remove the rear seats of the car; Unscrew the tightening screws of the metal cap (if present) with a socket wrench, remove it from its seat. Unscrew the large locking pin of the fuel pump (plastic or metal), disconnect the power supply clamps and the liquid circulation pipes. We extract the floating fuel pump from its seat with attached disassembled pieces. Finally we reassemble the new pump inside the tank. We assemble all the pieces for correct functioning.


Posted on 24 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Clio 1998-2005 - What does the Renault Clio 2 diesel pump warning light mean? Read Answer
    • Clio 1998-2005 - Where is the fuel pump located on Renault Clio? Read Answer
    • Clio 2005-2013 - Where is the fuel pump of the Renault Clio located? Read Answer
    • Clio 2005-2013 - How much does it cost to replace the Renault Clio petrol pump? Read Answer
    • Clio 1998-2005 - How much does the petrol pump cost of a Renault Clio 1.2? Read Answer
    • Clio 1998-2005 - How to replace the fuel pump on the Renault Clio Mk2? Read Answer
    • Clio 1998-2005 - What problems does the diesel pump of the Renault Clio 1.5 dCi have? Read Answer
    • Clio 2005-2013 - Where is the inertia switch on the Renault Clio 3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos