Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Renault Laguna

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

The process for resetting the "service" (or "service interval") on the Renault Laguna may vary slightly depending on the year and specific model of the vehicle. Below is a generic procedure that may work for many Renault Laguna models.

However, it is recommended to always consult the owner's manual for your vehicle for precise instructions. Before starting, ensure that the service or interval has been carried out correctly and that the reason for the reset is appropriate.

Here is a generic procedure to reset the "service" on the Renault Laguna: Turn on the car: Ensure the car is off, then insert the key and turn it to the "ON" position without starting the engine. Press and hold the reset button: Look for the reset button or display on the instrument cluster.

Usually, the reset button is located near the rev counter or may be incorporated into the multifunction display. Start the reset procedure: While holding the reset button, turn on the ignition ("ON" position) and wait for a reset message or a flashing light on the dashboard.

Release the reset button: When the reset message or light appears, release the reset button. Confirm the reset: Press the reset button again to confirm the reset of the "service". You may need to hold the button for a few seconds or follow the instructions displayed on the screen.

Turn off the ignition: Turn off the ignition and remove the key. Check the reset: Turn the ignition back on and check if the "service" message or light has disappeared. If the reset has been performed correctly, the service counter should be reset or set to the next maintenance interval.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) In today’s video, we will see the steps that will allow us to reset the service light for the regular maintenance oil change on the second generation…
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial, you will see how to reset the service light in the Renault Laguna, a very simple and quick operation to perform only after completi…
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial, you will see how to reset the service light in a Renault Laguna, a very simple and quick operation to be performed only after compl…

Other guides you may be interested in

    Frequently Asked Questions

    • Laguna 2001-2007 - How to enter the radio code in the Renault Laguna? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos