Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Renault Master?

Model: Renault Master MK 3 - Years 2010-2023
Part: Brake pads

To replace the rear brake pads on the Renault Master, lift the vehicle so that the rear wheel is not in contact with the ground: after lifting the vehicle, loosen the bolts that secure the wheel, remove it, and access the components at the rear. At this point, unscrew the screws that secure the brake caliper, detach it from the disc, and slide out the pads inside: the new pads can then be inserted, and the caliper can be secured to the disc, followed by remounting the corresponding wheel.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Renault Master
How to Replace the Rear Brake Pads on a Renault Master
Renault Master (2010-2023 / MK 3) To replace the rear brake pads on a Renault Master, first remove the wheel to access the brake disc and caliper. Using a spanner, loosen the nuts tha…
How do you replace the brake pads in the Renault Master?
How do you replace the brake pads in the Renault Master?
Renault Master (1997-2010 / MK 2) Regardless of the driving style, whether more lively or moderate, brake pads will wear out over time and will need to be replaced, just like in the v…
Guide to replacing the rear brake pads on the Renault Master
Guide to replacing the rear brake pads on the Renault Master
Renault Master (2010-2023 / MK 3) This guide will show you the main steps to remove and replace the rear brake pads on the Renault Master. First, lift the vehicle and remove the rear …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos