Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Master
    4. : How do i replace the rear brake pads of the Renault Master?

Renault Master - Video tutorial

Model: Renault Master MK 3 - Years 2010-2023
Part: Brake pads
Operation: How do i replace the rear brake pads of the Renault Master?

To be able to replace the rear brake pads of the Renault Master you must first remove the wheel to gain access to the disc and the brake caliper. Using a wrench it will be necessary to loosen the nuts that fix the pins positioned on the caliper, which allow them to close. When the pins have been removed, it will be necessary to pry with a flat screwdriver to be able to open the pliers. Inside there will be the old pads that will have to be extracted and then replaced with new spare parts. After the replacement, it will be possible to assemble all the parts previously removed.


Posted on 25 February 2024 by ScegliAuto



Guide to replacing the rear brake pads of the Renault Master.
Renault Master (2010-2023 / MK 3) Today's guide will show us the main steps on how to disassemble and replace the rear brake pads of the Renault Master. As a first step, we lift the v
How do you replace the rear brake pads on the Renault Master?
Renault Master (2010-2023 / MK 3) The replacement of the rear brake pads of the Renault Master is done by lifting the vehicle so that the rear wheel is not in contact with the ground:
How to replace the rear brake pads in the Renault Master van?
Renault Master (2010-2023 / MK 3) In this tutorial, we can see how to replace the rear brake pads in the Renault Master van, a very simple operation but one that requires good manual

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos