Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the rear brake pads on the Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

This guide will show you the main steps to remove and replace the rear brake pads on the Renault Master. First, lift the vehicle and remove the rear wheel; then unscrew the bolts securing the brake caliper, applying pressure to the caliper piston to retract it. Now remove the old pads and clean the caliper of any residual dirt; then install the new original brake pads, reattaching the caliper onto the disc and finally the rear wheel, following the video tutorial to the end!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Renault Master?
How to Replace the Rear Brake Pads on the Renault Master?
Renault Master (2010-2023 / MK 3) To replace the rear brake pads on the Renault Master, lift the vehicle so that the rear wheel is not in contact with the ground: after lifting the ve…
How to Reset the Brake Wear Light on the Renault Master
How to Reset the Brake Wear Light on the Renault Master
Renault Master (2010-2023 / MK 3) When the brake wear light appears on the instrument cluster of the Renault Master, it means that the brake pads in the position indicated by the onbo…
Guide to Replacing the Front Headlights of the Renault Master
Renault Master (2010-2023 / MK 3) Today's guide will show you how to remove and replace the front headlight and its bulbs on the Renault Master, following the instructions below. Firs…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos