Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Renault Master Van?

Model: Renault Master MK 3 - Years 2010-2023
Part: Brake pads

In this tutorial, you will see how to replace the rear brake pads on a Renault Master van. This operation is straightforward but requires good manual skills. First, lift the side you will be working on, taking the necessary safety measures. Then, remove the wheel and undo the lower bolt of the caliper. Next, lift the caliper, remove the old pads, and compress the piston using a vice or an equivalent tool. At this point, clean any dirt residue, position the new parts, and follow the reverse procedure to reassemble everything.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the rear brake pads on the Renault Master
Guide to replacing the rear brake pads on the Renault Master
Renault Master (2010-2023 / MK 3) This guide will show you the main steps to remove and replace the rear brake pads on the Renault Master. First, lift the vehicle and remove the rear …
How to Replace the Rear Brake Pads on a Renault Master
How to Replace the Rear Brake Pads on a Renault Master
Renault Master (2010-2023 / MK 3) To replace the rear brake pads on a Renault Master, first remove the wheel to access the brake disc and caliper. Using a spanner, loosen the nuts tha…
How to Replace the Rear Brake Pads on the Renault Master?
How to Replace the Rear Brake Pads on the Renault Master?
Renault Master (2010-2023 / MK 3) To replace the rear brake pads on the Renault Master, lift the vehicle so that the rear wheel is not in contact with the ground: after lifting the ve…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos