Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Wear Light on the Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Warning light – error code

See other generations:
Video tutorial

When the brake wear light appears on the instrument cluster of the Renault Master, it means that the brake pads in the position indicated by the onboard computer need to be replaced due to excessive wear: you will need to remove the wheels by loosening the bolts that secure them to the hubs.

This will allow access to the brake caliper, which can then be detached to replace the pads inside; also check for any damage to the brake lines or to the cables and sensors connected in this area.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2010-2023 / MK 3) By following these simple steps, we will reset the service light for the regular maintenance of the engine oil change in the Renault Master. First of…
How to reset the service light on a Renault Master van?
How to reset the service light on a Renault Master van?
Renault Master (2010-2023 / MK 3) In this tutorial, you will see how to reset the service light on a Renault Master van, a very simple and quick operation. Before proceeding, ensure t…
How to Reset the Service Light on a Renault Master Van?
How to Reset the Service Light on a Renault Master Van?
Renault Master (2010-2023 / MK 3) In this tutorial, you will learn how to reset the service light on a Renault Master van, a very simple and quick operation to perform only after comp…

Other guides you may be interested in

    Frequently Asked Questions

    • Master 2010-2023 - How to reset the "service" of a Renault Master? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos