Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the air filter of the Renault Scenic 3.

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Air filter
Operation: How to replace the air filter of the Renault Scenic 3.

Thanks to the following mini guide, you will finally be able to replace the engine air filter on your Renault Scenic Mk3 (year 2009-2015) completely independently. First of all, make sure that the car is turned off, then open the front hood and proceed to remove the entire panel located on the top of the engine compartment. Once this operation is completed, locate the air filter box on the right side and remove the protective cover after unscrewing all the various screws. Finally, replace the old filter with the new one.


Posted on 31 July 2023 by ScegliAuto



How to replace the air filter of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) In the following guide dedicated to all of you who own a Renault Scenic Mk2, we will discover the steps you need to take to correctly replace the eng
How to replace the air filter on the Renault Scenic
Renault Scenic (1993-2003 / MK 1, RX4, Scenic 1) If you want to replace the air filter on your Renault Scenic yourself but you don't know how to do it, then read the following mini guide carefully a
Renault Scenic air filter replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you replace the air filter on a Renault Scenic? Let's see how to remove the car air filter from inside the engine compartment. We open the eng

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the Renault Scenic 3 engine air filter located? Read Answer
    • Scenic 2003-2009 - Where is the Renault Scenic II engine air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos