Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads on the Renault Kangoo?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Brake pads

In this tutorial, we can see how to replace the front brake pads in the Renault Kangoo, a very simple operation but one that requires good manual dexterity. First of all, we lift the side on which we will be working, then we remove the wheel and, using a flat-tipped screwdriver, we loosen the caliper by levering it in the indicated slot. We then unscrew the lower bolt, lift the caliper, and remove the old brake pads. At this point, we can remove any residual dirt, position the replacements, and reassemble everything following the reverse procedure.

Posted on 12 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake pads on a Renault Kangoo
How to replace the brake pads on a Renault Kangoo
Renault Kangoo (2007-2021 / FW, FC, MK 2) In this video tutorial, we can see how it is possible to replace the brake pads on a Renault Kangoo by following some fundamental steps: the first th…
How to change the front brake pads on the Renault Kangoo II
How to change the front brake pads on the Renault Kangoo II
Renault Kangoo (2007-2021 / FW, FC, MK 2) Let's see how to change the front brake pads on a Renault Kangoo II: we start by opening the hood and removing the cap from the brake fluid reservoir…
How to change brake pads and brake discs on the Renault Kangoo
How to change brake pads and brake discs on the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Replacing the front brake discs and pads is a maintenance that can easily be done by yourself; therefore lift the car by placing it in safety on suit…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos