Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to perform the regeneration of the particulate filter of the Renault Megane 4?

Renault Megane - Video tutorial

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Particulate filter
Operation: How to perform the regeneration of the particulate filter of the Renault Megane 4?

On Renault Megane 4 models, the regeneration of the particulate filter must be performed at the workshop as it is necessary to use a computer for diagnostics, which will be connected to the car through the OBD port and a specific reprogramming program. The regeneration process starts by connecting the computer to the vehicle and then entering the year of the car and selecting the option related to the particulate filter. The computer, in combination with the car, will perform the regeneration, and we simply need to select the OK option to confirm the cleaning and regeneration requests.


Posted on 6 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Megane 2015-2023 - What causes particulate filter problems in Renault Megane 1.5 110hp? Read Answer
    • Megane 2015-2023 - What does the anti-pollution warning light on the Renault Megane mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos