Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Gear Knob on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Shift knob

In this brief and simple guide, you will learn how to remove and replace the gear knob and gaiter on a Renault Megane. First, get into the vehicle and start by removing the screws from the plastic cover at the base of the gear lever. Then, pull off the gaiter and firmly pull the gear knob upwards to detach it from the lever, as shown in the video. Now, install the new gear knob and, if necessary, the gaiter, ensuring everything is securely fixed to the lever, following the video tutorial to the end!

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on the Renault Megane
How to Replace the Gear Knob on the Renault Megane
Renault Megane (1995-2003 / Megane 1) Removing and replacing the gear knob on the Renault Megane is a very simple operation. First, get inside the vehicle and pull the gear knob upwards w…
How to Remove the Gear Knob and Gaiter on the Renault Megane 3
How to Remove the Gear Knob and Gaiter on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) In this video tutorial, you will see how to remove and replace the gear knob and gaiter on the Renault Megane third series, in RS version. First, get…
Replacement of the automatic gear knob of the Renault Megane
Replacement of the automatic gear knob of the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) In this short guide, we will see the instructions that will allow us to disassemble and replace the knob of the automatic gear lever of the Renault M…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos