Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix Noise in Your Car's Fan

Model: Renault 19 MK 1 - Years 1988-1997
Part: Blower motor

This guide shows how to repair a motor in the ventilation system of your car. It is an easily solvable problem that you can fix yourself. This method can be used for any type of car. The source of the noise inside the cabin may be due to dirt. Therefore, get a vacuum cleaner and remove all the dirt. You also need to remove one of the two vents and clean inside there as well. The noise you hear could also be caused by the bearing inside, which may disappear within a few minutes by using some lubricant.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Renault 19?
Where are the fuses located in the Renault 19?
Renault 19 (1988-1997 / MK 1) On the Renault 19, all fuses are contained within the appropriate fuse boxes that are installed on the vehicle: in this car model, it is possible to …
How to replace the cylinder head gasket on a Renault 19 Energy engine.
How to replace the cylinder head gasket on a Renault 19 Energy engine.
Renault 19 (1988-1997 / MK 1) Let's start the operation by disconnecting the vehicle's battery and removing the coolant and engine oil. Then we dismantle the belt cover and remove…
Where is and how to reach the fuse box of a Renault 19?
Where is and how to reach the fuse box of a Renault 19?
Renault 19 (1988-1997 / MK 1) The fuse box of a Renault 19 is located in the glove compartment on the front passenger side. To access it, start by opening the glove compartment. I…

Remove the Rear Light of a Nissan Qashqai

Remove the rear light of a Nissan Qashqai to replace the damaged bulbs. Open the boot lid, unscrew the securing bolts located at the side of the rear light using a screwdriver (or socket spanner), and once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with equivalent size and voltage pieces (replace the light if damaged). Finally, refit the light, proceeding in reverse order with the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos