How to Reset the Service Light on the Renault Captur 2?

Model: Renault Captur MK 2 - Years 2019-2026
Part: Service warning light

In this article and video, we will see how to reset the maintenance light on the Renault Captur 2. The procedure is simple and does not require any specific tools or software. To reset the maintenance light, first, turn on the panel without starting the engine by pressing the start button without pressing the pedals. Once the panel is on, press the down arrow button on the right side of the panel, scroll until the oil change interval appears, and once located, press and hold the button for 5 seconds. After 5 seconds, the light will start flashing; keep holding the down arrow button until the light stops flashing, indicating that it is resetting. Once the oil interval has been reset, scroll to the maintenance interval and perform the same procedure as for the oil light to reset it. Once these two resets are completed, the procedure will be finished.

Updated on 26 August 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Engine - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!

by ScegliAuto

How to Reset the Service Light on the Renault Captur 2?

Related tutorials

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

More videos