Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Renault Clio II Diesel

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Timing belt

The timing belt plays a crucial role in the engine as it ensures the correct synchronisation between the movement of the pistons and the valves: its failure can cause severe, often irreparable damage to the engine. Therefore, it is essential to adhere to the maintenance schedule, which recommends replacement within 75,000 miles or every 5 years, whichever comes first. To carry out this maintenance, you need a good understanding of general mechanics and, importantly, the appropriate tools to hold the pulleys in place once the timing marks are aligned.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Renault Clio 1.2
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will discover the instructions to remove and replace the timing belt on the petrol Renault Clio 1.2. First, open the bonnet and begin to dis…
Replacing the Timing Belt on a Renault Clio
Replacing the Timing Belt on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Although replacing the timing belt is not exactly a DIY task, you can attempt the replacement by following the instructions below and referring to th…
How to replace the timing belt on the Renault Clio 1.2
How to replace the timing belt on the Renault Clio 1.2
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will illustrate how to dismantle and replace the timing belt on the petrol Renault Clio 1.2. First, raise the vehicle and start b…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos