Do it yourself
| ||||
|
Manual maintenance reset procedure
Model: Renault Megane
Megane 2
- Years 2002-2010 The procedure for resetting the "SERVICE" message is manual and can only be activated near the time limit (one month) or the mileage (1500 km before). Before resetting the service, it is recommended to change the engine oil and carry out all the checks as indicated in the use and maintenance manual. Therefore, locate the button located on the side, at the end of the wiper control lever, to the right of the steering wheel. RESETTING PROCEDURE 1. Close all the vehicle doors (leaving the doors open, otherwise it is not possible to view the other messages on the instrument panel display) 2. Switch on the instrument panel 3. By pressing the button located at the end of the control lever control of the wipers, scroll the menu on the odometer display until you reach the item relating to the maintenance notice (wrench) which will indicate the remaining kilometers (alternatively "- - - - -") 4. Press and hold press the button again for at least 10s, until the message starts flashing and will be replaced by the new mileage interval for the next maintenance 5. Release the button at the end of the flashing of the new interval and check that the reset has taken place
Posted on 23 June 2023 by ScegliAuto
How to reset the service light on the Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) In this article, we will analyze the procedure to reset the maintenance light on the Renault Megane 4. This procedure can be useful in case the light
How to reset the service on the Megane 3
Renault Megane (2008-2015 / Megane 3, Megane III) In this video, it is shown how to perform the maintenance light reset procedure on the Renault Megane MK3. This procedure is very simple and quick. I
How to reset the maintenance light on the Renault Megane.
Renault Megane (2008-2015 / Megane 3, Megane III) This video tutorial shows the procedure for resetting the maintenance light on a 2010 Renault Megane. First, insert the key into its slot and turn on Other guides that may interest you
|
Frequently Asked QuestionsHow to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |