Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Master
  6. : Where are the fuses of the Renault Master located?

Renault Master - Video tutorial

Model: Renault Master MK 3 - Years 2010-2023
Part: Fuse box
Operation: Where are the fuses of the Renault Master located?

On the Renault Master, the fuses are located inside special fuse boxes that are installed on the vehicle: in this type of vehicle, two boxes are installed to contain the fuses. The first one is located on the right side of the engine compartment and contains the fuses responsible for the low beam headlights, windshield wipers, fog lights, etc. The second box is instead positioned on the lower left side of the engine compartment: it contains the fuses responsible for the operation of the car radio, cigarette lighter, etc.


Posted on 16 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Master 2010-2023 - What is the location of the fuse box in the Renault Master? Read Answer
    • Master 1997-2010 - What is the position of the starter relay in the Renault Master? Read Answer
    • Master 2010-2023 - Where is the indicator relay located in the Renault Master? Read Answer
    • Master 2010-2023 - Where are the fuses located in the Renault Master 3? Read Answer
    • Master 2010-2023 - What is the location of the fuse boxes in the 2021 Renault Master? Read Answer
    • Master 1997-2010 - Where is the cigarette lighter fuse located in the Renault Master? Read Answer
    • Master 2010-2023 - Where is the Renault Master cigarette lighter fuse located? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos