Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Master
    4. : Where are the fuses on the Renault Master located?

Renault Master - Video tutorial

Model: Renault Master MK 2 - Years 1997-2010
Part: Fuse box
Operation: Where are the fuses on the Renault Master located?

The Renault Master fuses are located inside the special fuse boxes in the middle: there are two of them and they are located inside the passenger compartment and inside the engine compartment. The first is located at the bottom left of the steering column: it contains the fuses for the instrument panel, airbags, rear light bulbs, etc. The second fuse box is instead located inside the engine compartment, on the right side of the latter: inside you can find the fuses for the immobilizer, ABS, fuel pump, etc.


Posted on 4 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Master 2010-2023 - What is the location of the fuse box in the Renault Master? Read Answer
    • Master 1997-2010 - What is the position of the starter relay in the Renault Master? Read Answer
    • Master 2010-2023 - Where is the indicator relay located in the Renault Master? Read Answer
    • Master 2010-2023 - Where are the fuses located in the Renault Master 3? Read Answer
    • Master 2010-2023 - What is the location of the fuse boxes in the 2021 Renault Master? Read Answer
    • Master 1997-2010 - Where is the cigarette lighter fuse located in the Renault Master? Read Answer
    • Master 2010-2023 - Where is the Renault Master cigarette lighter fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos