Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Espace
    4. : How to replace car shock absorbers

Renault Espace - Video tutorial

Model: Renault Espace MK 5 - Years 2015-2022
Part: Shock absorbers
Operation: How to replace car shock absorbers

In the event that our car has traveled more than 100,000 km, it will be necessary to replace the shock absorbers. The latter, in fact, have the function of cushioning the vehicle's jolts and increasing its safety while facing a curve. We lift the left side of the car with the jack and then remove the wheel, taking care to remove all four bolts that hold it still. At this point, we will have to open the hood by operating the appropriate lever and removing all four screws that are positioned above the shock absorber. Subsequently, the two screws located on the axle shaft and the one placed on the stabilizer which is parallel to the shock absorber must also be removed. The shock will then come off by itself.


Posted on 11 September 2023 by ScegliAuto



Rear shock absorber replacement
Renault Espace (2015-2022 / MK 5) The replacement of the rear shock absorbers is carried out in a very simple way since the spring and the shock absorber are not coaxial as in the fro
How to reset the maintenance warning light on the Renault Espace 4
Renault Espace (2002-2014 / MK 4) The procedure for restoring the maintenance warning light (also called service) of your Renault Espace Mk4 (year 2002-2014) is practically identical
Replacement of the fuses located in the dedicated box on a Renault Espace
Renault Espace (2002-2014 / MK 4) Replacing the fuses located in the dedicated box on a Renault Espace? Let's see how to proceed. We open the door and enter the car body, open the dra

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos