Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

Video tutorial

The Renault Kadjar, like many new generation vehicles, automatically resets the TPMS light related to tyre pressure. To start the reset of the light, it is necessary to adjust the tyre pressures as per the manufacturer's specifications.

The values to set are those required by the manufacturer and are placed on a sticker on the door. The TPMS light will automatically reset after completing the wheel inflation operation.

Simply start the vehicle and wait a few seconds if necessary, allowing the engine revs to rise.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Renault Kadjar
How to reset the tyre pressure warning light on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The following steps will allow you to reset the tyre pressure monitoring system (TPMS) warning light on the Renault Kadjar; before performing the res…
How to Reset the Tyre Pressure Warning Light on the Renault Kadjar
How to Reset the Tyre Pressure Warning Light on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The following information will guide you on how to reset the tyre pressure monitoring system (TPMS) warning light on the Renault Kadjar; before perfo…
How do you reset the Service light on a Renault Kadjar?
How do you reset the Service light on a Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) It will be possible to reset the Service light displayed on the instrument panel of the Renault Kadjar by inserting the ignition key into the corresp…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos