Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Tire pressure warning light

The following information will guide you on how to reset the tyre pressure monitoring system (TPMS) warning light on the Renault Kadjar; before performing the reset, ensure all four tyres are at the correct operating pressure. Next, get in the vehicle and turn on the instrument cluster; use the arrow controls on the steering wheel to access the onboard computer menu and scroll through the options until you reach the tyre pressure setting, as shown in the video. At this point, confirm and execute the reset by pressing the OK button, permanently clearing the TPMS warning light!

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Renault Kadjar?
How to reset the tyre pressure warning light on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To reset the tyre pressure warning light on the Renault Kadjar, inflate the tyres to the recommended pressure value: this value is indicated on the s…
How to reset the tire pressure warning light on the Renault Kadjar
How to reset the tire pressure warning light on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The following steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Kadjar; before performing the reset, it is…
How to replace the tire pressure sensor on the Renault Kadjar.
How to replace the tire pressure sensor on the Renault Kadjar.
Renault Kadjar (2015-2022 / MK 1) In this guide, we will go over the instructions for disassembling and replacing the tire pressure sensor of the Renault Kadjar. First, we lift the ve…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos