Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate and deactivate the Cruise Control on the Renault Kadjar.

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Onboard computer

Video tutorial

Let's see how to activate and deactivate cruise control on the Renault Kadjar: the buttons are located on a panel on the right side of the steering wheel. To activate, drive at a speed over 30 km/h and press the "cruise" button.

A white indicator light will appear on the gauge indicating the system is ready but needs to be set. Reach the desired speed and press the "set" button. The light turns green and the speed is stored.

To increase or decrease the speed, use the +/– buttons. For a temporary pause, press the "0" button, or press the brake or clutch; cruise control will pause, but the speed remains stored in memory.

To resume, press "res+". For complete deactivation, press the "cruise" button again and the light will turn off completely.


Posted on 11 January 2026 by ScegliAuto


Related tutorials

How to activate and deactivate the ECO mode in the Renault Kadjar?
How to activate and deactivate the ECO mode in the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) In this tutorial we can see how to activate and deactivate the ECO mode in the Renault Kadjar, an extremely simple and quick operation. This mode act…
How to Activate and Deactivate the Start&Stop System of the Renault Kadjar
How to Activate and Deactivate the Start&Stop System of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Below are the instructions that will allow you to activate and deactivate the Start&Stop system of the Renault Kadjar in simple steps. First, get in …
How to activate/deactivate the handbrake in a Renault Kadjar
How to activate/deactivate the handbrake in a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) To activate the electronic parking brake in the Renault Kadjar, come to a complete stop and locate the control on the centre console, near the gear l…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos