Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to replace the front speakers in the Renault Megane?

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Loudspeaker
Operation: How to replace the front speakers in the Renault Megane?

In this tutorial, we can see how to replace the front speakers in the Renault Megane, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the door in which we will be working and, using a preferably plastic spatula, detach the lower cover. Once this is done, unscrew the two speaker fixing screws, separate it from the panel, and disconnect the power connector. Finally, connect the replacement, secure it to the base, and follow the reverse procedure to reassemble everything.


Posted on 8 December 2023 by ScegliAuto



How to replace speakers on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In this guide, we will see how to disassemble and replace the front speakers of the Renault Megane, following the instructions below. First we open t
How to disassemble and replace the speaker of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Below we will see the step-by-step instructions that will allow us to disassemble and replace the speakers of the Renault Megane. First of all, we ge
How do you replace the speakers on the Renault Megane?
Renault Megane (2002-2010 / Megane 2) In order to replace the speakers on the Renault Megane, the door panel must be completely removed: here it will be possible to detach the window regu

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos