Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulbs of the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fog lights

See other generations:
Video tutorial

This guide will show you how to remove and replace the fog light bulbs in the front headlight of the Renault Scenic. First, move to the front of the vehicle and start removing the wheel arch liner by unscrewing the fixing screws; then remove the plastic cap and disconnect the electrical connector of the fog light bulb, as shown in the video.

At this point, install the new fog light bulb of the correct type and with the same fitting; finally, refit the cap and the plastic wheel arch liner!


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Replacing Fog Light Bulbs on Renault Grand Scenic 2
Replacing Fog Light Bulbs on Renault Grand Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) In this video, you will learn how to replace the fog light bulbs on the Renault Grand Scenic 2. First, lift the car and use a screwdriver to disconne…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the bulb on a Renault Scenic, open the bonnet to access the components in the engine bay. Locate the bulb within the corresponding headlam…
Where to find and how to access the starter motor fuse of a Renault Scenic?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) Today, dedicate time to locating and accessing the starter motor fuse of your Renault Scenic. First, open the front bonnet. Once done, you will notic…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos