Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs of the Renault Kadjar

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Headlight bulb

Today’s main steps will show you the procedure for removing and replacing the front headlight bulbs of the Renault Kadjar. First, open the bonnet and start unscrewing the fixing screws located at the top of the front headlight; then remove the plastic cap and disconnect the bulb connector to remove it, as shown in the video. At this point, install the new dipped or main beam bulb with the same fitting; insert it into the optical group and check its operation before refitting everything.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on a Renault Kadjar
How to Replace the Rear Light Bulbs on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Let’s briefly go through the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kadjar. First, open the boot li…
Replacing the Front Headlight Bulb on the Renault Kadjar
Replacing the Front Headlight Bulb on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The following steps will guide you through the process of removing and replacing the front headlight bulb on the Renault Kadjar. First, open the bonn…
How do you replace the front headlight of the Renault Kadjar?
How do you replace the front headlight of the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) The front headlight of the Renault Kadjar, which we see in the video available here, can be easily replaced, but before that we need to remove the bu…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos