Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in the Renault Twingo?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Service warning light

Resetting the service light in the Renault Twingo, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by entering the cabin, then insert the key and turn on the instrument cluster. Scroll through the various screens on the display using the button located at the end of the right control lever, reach the service screen and perform the reset by holding down the same button. Finally, complete the procedure by restarting the vehicle.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in the Renault Twingo?
How to Reset the Service Light in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To reset the service light in the Renault Twingo, insert the ignition key into the lock and turn it to activate the instrument panel: once it is on, …
How to reset the service in the Renault Twingo?
How to reset the service in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, we can see how to reset the service in the Renault Twingo, an extremely simple and fast operation, to be carried out only after com…
How to reset the service light on the Renault Twingo 3
How to reset the service light on the Renault Twingo 3
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To reset the service light on a Renault Twingo model 3, produced from 2014 to 2024, we need to turn on the instrument panel and immediately press the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos