Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Traction Control on a Renault Twingo?

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Checks and maintenance

To disable the traction control on a Renault Twingo, connect a diagnostic tool to the OBD port of the vehicle: this is located in the lower left part of the dashboard, relative to the steering column. Once the scanner is connected, select the relevant car model and its corresponding version: this will allow you to follow all the instructions provided in the tutorial to reset the light. At the end of the procedure, you can disconnect the scanner and permanently turn off the instrument cluster.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disable the immobilizer in case of emergency on the Renault Twingo
How to disable the immobilizer in case of emergency on the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) In this guide, we will see how to disable the immobilizer, in case of emergency or malfunction, of the Renault Twingo. First, we open the hood of the…
How to Disable the Passenger Airbag on the Renault Twingo II
How to Disable the Passenger Airbag on the Renault Twingo II
Renault Twingo (2007-2014 / Twingo 2) In this video, learn how to disable the passenger airbag on the Renault Twingo II. This operation is necessary when transporting a child in the front…
How do you replace the battery of the Renault Twingo remote control?
How do you replace the battery of the Renault Twingo remote control?
Renault Twingo (2007-2014 / Twingo 2) To replace the battery of the Renault Twingo remote control, you need to use an object to pry open the bottom of the device: by doing so, you will be…

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer
    • Twingo 2014-2024 - What are the problems of the Renault Twingo? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos