Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on a Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: V-belt

In this video, see how to change the auxiliary belt on the Renault Megane III. From the first diagram, you can see the correct layout of the auxiliary belt on this vehicle. Open the bonnet and lift the front of the car by removing the right wheel. From the front, remove the engine cover and the front wheel arch liner. From here, you can easily access the auxiliary belt by rotating the tensioner pulley clockwise to loosen the belt tension, allowing you to remove it. It is recommended to replace the tensioner pulley along with the belt. Refit the belt, ensuring the correct orientation and that the grooves fit properly. Reattach the wheel arch liner, the engine cover, the right front wheel, and lower the vehicle. Close the bonnet. The job is complete.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Change the Timing Belt on a Renault Megane
How to Remove and Change the Timing Belt on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Let’s see how to remove and change the timing belt on a Renault Megane. Lift the car on a column lift and remove the front wheel with a screwdriver, …
Replacing the Timing Belt on the Renault Megane 1.5 dCi
Replacing the Timing Belt on the Renault Megane 1.5 dCi
Renault Megane (2002-2010 / Megane 2) In this guide, we will discover how to dismantle and replace the timing belt and water pump on the Renault Megane 1.5 dCi. First, lift the vehicle an…
How to Replace the Timing Belt on a Renault Megane
How to Replace the Timing Belt on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How to replace the timing belt on a Renault Megane? Start by lifting the car on a column lift (if necessary, remove the front wheel using a screwdriv…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos