Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on the Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Warning light – error code

In this video we can see how to reset the service of a Renault Megane III: first of all, turn on the instrument panel by briefly pressing the ignition button without pressing any pedals. Then select the menu by scrolling through the on-board menu using the button located at the end of the lever on the right side of the steering wheel, selecting scheduled maintenance (or necessary maintenance, depending on the version). Press and hold the lower button located at the end of the windshield wiper lever for about ten seconds: the new maintenance interval will appear. Release the button and turn off the panel; service reset.

Posted on 7 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, see how to reset the service on the Renault Megane, an extremely simple and quick operation to perform only after completing all sc…
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to reset the service light on a Renault Megane, a very simple and quick operation to perform only after completing…
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to reset the service in a Renault Megane, a very simple and quick operation to perform only after completing all s…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos